How To Make Glitter Wine Glasses

Wine glasses never go out of trend and they usually always look elegant and classy. Pouring them over with glitter enhances their Feel. So let’s just add chunks of glitters to make them worth controlling.

DIY glitter wine glasses are simple make and add a unique, decorative look to parties, special attractions and holiday. You can coordinate glitter in colors game your special event, wedding, anniversary or birthday celebrate. They also add sparkle to any holiday! Once you’ve learned the basic techniques, it's totally easily have to create more complex and detailed designs.

Glittery wine glasses are fantastic for birthday presents, bachelorette parties, weddings, and other fancy occasions. You can use painter’s tape to create sharp lines and designs on your wine glasses and and then make the glitter stick to your wine glasses using some glass paste. This project can take a few hours because of the drying times, but may be quite easy and fun to try and.

PLANNING & PREPARING

Before getting started, must have proven fact that what we want to do and backyard walls we will have. It’s awesome prone to find all of the haul necessary for the glittery beautiful wine glasses in your own. But if you don’t have, don’t panic the material is simple find on and budget friendly as extremely well.

Purchase a set of glass wine contacts and glasses. You can find inexpensive sets at Ross or TJ Maxx, an individual can take up glasses in the thrift store.
Buy glitter in simple . colors, Mod Podge, a paintbrush and lacquer sealing spray in the craft hold. Not every craft store will carry the lacquer clear coat, but it is the ingredient allow ensure your glitter glasses are washable.


INGREDIENTS
glass glue, such as Mod Podge or similar
wine glasses
cardboard
paper plate
painter’s tape
large paint brush
glitter
scissors
isopropyl alcohol
cotton balls
ribbon
Let’s just get Started!

Consider sketching the design first.Drawing your design on a piece of paper permit you observe what looks nice and what doesn't, and thus prevent you from making mistakes later always on. While it is possible to clean off glitter and glue while effectively still wet to change the design, it is better to get the design right the first time. Here are some popular design schemes for glitter wine glasses:
Apply glitter only to the base for this wine glass, leaving outside of of the glass card blank. The glitter likewise extend ½ to 1 inches (1.27 to 0.54 centimeters) up the stem belonging to the glass.
Apply glitter only on the stems within the wine glass, leaving the rest of the glass write off.
Create a preliminary or number using glitter.
Create stripes on this glass (or just the stem) using glitter.
Apply glitter to all glass, except the top ½ one inches (1.27 to one or two.54 centimeters of the rim.
Create designs using two different colors of rubber stamps.
Create ombré designs getting two colors blend into one the other.
Set up your workstation.Find an apartment table and cover it with some newspaper. You will be working with glue and glitter, which be quite messy. You should also place a small piece of cardboard or cardstock on your workspace to use for glitter collection. Viewed as make it simpler to return the excess glitter into the glitter bottle for utilize in other projects.
Clean the exterior of your wine glasses with alcohol.To particular the glitter will stick to the glass, you choose to clean the glass effectively. Use some cotton balls dipped in isopropyl alcohol to wipe the outer surface of your glass in plan to utilise the glitter.
After you have cleaned your glasses, set them aside for a few minutes and let the alcohol not damp.

Cut a thin strip of tape and apply it to your wine cups.Next, take your painter’s tape and cut it lengthwise create a long thin piece. If you will be applying the glitter just onto the stem, a person definitely can make use of a short line. Place the tape around the actual of the wine glass where you want your glitter to stop. Make certain the tape is even and securely attached towards the wine glass. Otherwise, you may end up with a crooked glitter line around your wine glass.
To apply glitter on the base for the wine glass, tape off the stem of your glass and then leave the base exposed. Wish to also leave ½ to one inches (1.27 to a.54 centimeters) of the stem exposed as well; the glitter will then extend onto part on the stem.

To apply glitter on the stems of the wine glass, cover the base of the glass with tape. Then, cover the bottom portion of your bowl do without tape also.

To create an initial or number using glitter, you can implement an glue stencil or apply the glue straight away to the glass free-hand.

To create stripes on the wine glass, simply wrap a long piece of tape around your glass in a spiral, making a candy-cane end result. There should be spaces in between the edges of the tape.

To use two greater colors, tape off other places your do not want covered in glitter and apply the glue to flourish of quite color. One you have applied the glitter and let the glue dry, you will apply the glue and glitter for that next color.

To create an ombré effect, simply tape trip bottom and top a part of your design and operate in the area between the pieces of tape.

Pour glass glue onto your paper portion.You will need to be able to dip your paint brush in the glue, so pour a generous amount of glue onto a paper plate. Make sure that can be enough to coat each glass with a thick layer of glue to ensure the glitter will stick.
Paint the portion of the wine glass with glue.When your tape is secured, spend paint brush and dip it in the glue. Then, begin painting the glue onto minimized half of the wine drink. Make sure that you apply an even, thick layer of glue towards the wine mirror.
You may use a foam brush if you are worried about leaving streaks on the glass. A foam paintbrush may apply paint more evenly in comparison to bristled paintbrush.



Pour glitter onto the glue.After have got applied the glue on the wine glass, set aside the paint brush. Then, hold onto part of your wine glass that does not have any glue on it. Hold the glass over your sheet of cardboard and start pouring glitter over the glue-coated areas of your wine glass.
Keep pouring glitter over the glass until all within the glue-coated areas are covered in an even layer of glitter.

When you are finished, you can return extra glitter for the bottle. Pick-up the cardboard and bend it slightly to develop a funnel and then pour the glitter into the glitter vial.

If surplus to do multiple colors of glitter, then avoid using need to let the first layer dry and then apply more glue to the glass. Then, pour your second glitter color as you did with the first layer.

Bottom of Form

Part2

Finishing the Glasses

Leave your wine glasses to dry.The wine glasses require to dry for an hour, we may also leave them overnight to ensure that they fully dry. The glasses will need to be completely dry before carbohydrates add the finishing splashes.
Remember in case you will be going to applying more layers of glitter, you can do that after the first layer has dried.

2.Remove the tape. As soon as the glasses are dry, slowly peel away the painter’s tape. A person remove the tape, there should be a clear, crisp line dividing the glitter-covered glass along with the glitter-free cyrstal glass. Discard the tape after you remove keep in mind this.

Seal the glitter. Next, you will need to seal the glitter with more glue or with a sealing spray, such as Krylon Very clear. To seal the glass with more glue, make use of large paintbrush to paint on another layer of glue in the glitter. Then, let the glass dry for at least an hour.

If you'd like to make use of a sealing spray, then you will need to go outside to seal your glass. You can put glass on the piece of newspaper on to the floor outside after which you spray the Krylon Crystal clear onto the glittery associated with your windshield. Then, allow the glass to dry much less than an hour.

3.Tie some ribbon throughout the stem. To a cute finishing touch to your glass, have a piece of ribbon and tie it around the top stem on your glass. Tie the ribbon in a bow and adjust as needed. Now your glass is going to use in order to give like a gift!

Bottom of Form

Part3

Caring for your personal Wine Glasses

Use your glasses every time they are dry.The glitter may smudge or come off easily if it's still just a little wet. To ensure that the glitter is completely dry, you might leave your glasses out to dry overnight. Put them somewhere that is dry and out of the reach of children and pets


Wash your wine glasses by pay.The glitter surface on your wine glass will be going to fragile, as well as will want to implement extra precautions to ensure that the glitter doesn't chip off when you clean it. Wash your glitter wine glasses by hand and lower the glitter areas as much as possible when you wash them. Focus on cleaning the interior of the goblet along with the rim on the wine windows.
Do not scrub the wine glasses. Instead, use a soft sponge and try to avoid the glittered arenas. Do not put the wine glasses in the dishwasher.

3. Dry your wine glasses instantly.Do not let your glitter wine glasses sit in water. Indicates wash your wine glasses by hand, be sure to dry them off immediately afterwards along with a soft towel. Otherwise, the excess moisture may cause the glitter to chip and slough off.


Tadaaaa!!!! You Beautiful Glittery Wine Glasses are Ready :)

If you have any concerns relating to where and ways to use Bulk Craft Glitter, you could call us at our website.